It is not exact replacement. The harness plug will face a different way, so you will have to snip one side of the bracket that holds the camera in place. Plug in the camera and place it in the lift gate opening. Start the car and put in in reverse to check which way it needs to face. Once you have figured out the orientation, put the car back in park and turn off the car. You would have noticed already that it is a little loose in the opening, so I put several foam rubber gaskets around the lens shaft so it would fit snug and not allow moisture in or rattle. Snip the left side of the bracket with some snips and then secure the bracket. Put the lift gate back together and enjoy! Works better than OEM! Night view is exceptional!